Choose AQUAvalve5 for Systems running 9mm and 16-9mm fittings
Choose AQUAvalve for older Systems running 6mm and 16-6mm fittings
Use easy2grow Extension Accessory Pack to upgrade your system to AQUAvalve5 with 9mm and 16-9mm pipe and fittings. An AQUAvalve5 Module Accessory Pack will fit into in your existing module trays perfectly.
It includes all the fittings you need to connect to 16mm pipe – even 16-9mm cross and tee connectors. If connecting directly to the reservoir using 9mm pipe you may also require the new 9mm Top Hat Grommet and 9mm Golf Filter or, if your reservoir has a 16mm outlet, the new 16-9mm click-fit adapter and filter.
Alternatively you can maintain older systems in tip-top condition with 6m and 16-6mm pipe and fittings using a 6mm AQUAvalve Module Accessory Pack.
1x AQUAvalve, 1m of 6mm pipe, 1x 6mm tee, 2x marix discs, 1x 16-6mm tee, 2x PotSock Squares, 1x full instructions
1x AQUAvalve5, 1m of 9mm pipe, 1x 9mm tee connector, 1x 16-9mm cross connector, 2x marix discs, 1x 16-9mm tee connector, 2x PotSock Squares, 1x full instructions
No more daily watering
Easily extended in minutes
No power / timers / mains water required
Simply gravity fed from a tank / water barrel
Also, environmentally friendly
Also, reduce consumption of water and feed by an impressive 50%, whilst increasing yields.
Due to the AQUAvalve's capability, they can remain unattended for weeks.
All AutoPot watering systems require ZERO POWER, NO PUMPS, NO MAINS WATER PRESSURE AND NO TIMERS to operate.
Whatever medium you choose the system caters for gardeners and growers of all abilities guaranteeing great results. With the round based pots, the grower can easily rotate the pot while it's still inside a tray. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Also, once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.
Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10 days before turning your system on. This will encourage a stronger and healthier root system.
Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when there is approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.
For best results, we recommend mineral fertilisers such as Hydroponic or Coco nutrients. Do not use organic fertilisers, as they have a tendency to block small pipe work.
Clean all substrate from the bottom and sides of the pots before placing in each tray. This will ensure your system is clean from the start.
Always use free draining substrates, for example: 50/50 soil/perlite, coco/perlite, soil/clay pebbles, coco/clay pebbles, rockwool/clay pebbles.
More from Autopot.